Refill Instructions for Edible Colors for Inkjet Printers

Warning Elegant Inks Edible Colors are intended for use only in Elegant Inks Color Cartridges.  The manufacturer does not recommend use for any other purpose. In purchasing this product the used accepts all responsibility and releases the manufacturer from any liability due to improper application of product.  The syringe included should be used ONLY for this product and cleaned/sterilized between uses.  DO NOT USE this product in cartridges that have had non-edible ink in them.  This could be hazardous to your health.  KEEP OUT OF REACH OF CHILDREN.

Instructions for use

Step 1: Be sure the edible ink cartridge is clean & prepared for filling. Examine the wicks at the outlet holes to be sure each color is pure & clear (black, cyan, magenta & yellow). Replace orange cartridge cap with silicone seal & lock in place. Remove label to find rubber plug underneath, remove plug with pin or needle & save. 

Step 2: Shake bottle before using. Inject reservoir 1/16" below opening neck. DO NOT OVERFILL. You may inject 1 or 2cc color into vent hole to 'prime' the edible ink cartridge. Clean syringe between colors. Rinse edible ink cartridge under warm water. Dry with paper towel Replace rubber plug & seal with a small piece of tape before using. Clean syringe thoroughly & repeat each color.

IcingMagic recommends a maximum refill amount of 3cc each color and 6cc black. Our cartridges are rated for a greater capacity but residual fluid may lead to overfilling & leakage. Bleed-over through the vent holes of the tri-color edible ink cartridge can cause tainting of neighboring color cells. Leakage can also cause other problems with the print head & other internal printer components. For other model cartridges fill 2cc less than manufacturer's recommended capacity.